Skip to content
Serving Fremont and nearby cities Open 24 hours, 7 days a week ยท (669) 286-3980

Furnace Repair in Fremont, CA

The short answer

If your furnace blows cool air, short-cycles, makes new noises, or won't light, PrimeAir HVAC Repair Service will diagnose the cause and give you a price before any work begins. Most furnace problems can be repaired, and Bay Area air quality rules don't require you to replace a furnace that still works.

When your furnace stops heating, short-cycles, or starts making noises it never made before, you want a clear answer about what's wrong and what it will take to fix it. PrimeAir HVAC Repair Service repairs gas furnaces for homeowners in Fremont and nearby cities, including Newark, Union City, and Milpitas. Winters around the Bay are mild and damp, so many furnaces sit idle for months and then get pushed hard on the first cold nights. That stop-and-start pattern is when worn parts, dirty sensors, and clogged filters tend to show up. We find the actual problem, explain your options in plain terms, and offer 24/7 emergency service when heat can't wait.

Signs Your Furnace Needs Repair

Some furnace problems are obvious, like no heat at all. Others build slowly and are easy to ignore until they turn into a breakdown on a cold night. Schedule service if you notice any of these:

If your carbon monoxide alarm sounds or you smell gas (a rotten-egg odor), don't try to troubleshoot. Get everyone out of the house, call your gas utility or 911 from outside, and have the furnace inspected before it runs again.

  • The furnace runs but blows cool or lukewarm air
  • It turns on and off every few minutes (short-cycling)
  • Some rooms stay cold while others warm up
  • Banging, squealing, rattling, or scraping sounds when it starts or runs
  • The blower runs nonstop, or doesn't come on at all
  • The igniter clicks repeatedly but the burners don't light
  • A burning smell that lasts beyond the first few minutes of the heating season
  • Gas bills climbing even though you haven't changed how you use heat
  • Your carbon monoxide alarm goes off

What We Check During a Furnace Repair Visit

A furnace that won't heat can fail for a dozen different reasons, and replacing parts by guesswork wastes your time and money. Our technicians work through the system in order, from the thermostat to the vent, so the repair fixes the cause and not just a symptom.

Once we find the problem, we show you what we found, explain what the repair involves, and give you a price before any work starts.

  • Thermostat settings, wiring, and batteries
  • Air filter condition and airflow through the return
  • Igniter or pilot assembly and flame sensor
  • Gas valve operation and burner flame
  • Blower motor, capacitor, and blower wheel
  • Limit switches, pressure switches, and control board error codes
  • Inducer motor and venting, checked for blockages or loose connections
  • Heat exchanger, inspected for cracks or corrosion
  • Condensate drain and trap on high-efficiency furnaces
  • Duct connections at the unit for obvious leaks

Repair or Replace Your Furnace?

Most furnace problems are worth repairing. A failed igniter, dirty flame sensor, weak capacitor, or tripped limit switch is usually a straightforward fix that keeps the furnace running for years. Replacement starts to make sense when a major repair is needed on an older furnace, when the heat exchanger is cracked, when the same parts keep failing, or when parts for your model are hard to find.

Bay Area air quality rules are worth understanding, but they shouldn't rush your decision. The Bay Area Air District's appliance rules do not require you to replace a working furnace; they apply only when an existing furnace fails or is replaced. Under Rule 9-4, natural gas furnaces manufactured starting in 2029 must meet a zero-NOx emission standard, which in practice points homeowners toward heat pumps when they replace a furnace after that date. If your furnace is aging, that timeline can help you decide whether to keep repairing it or start planning for a heat pump.

If you're considering a heat pump, keep in mind that the federal Energy Efficient Home Improvement Credit (25C) only covered qualifying heat pumps placed in service before December 31, 2025, so it isn't available for new installations. Bay Area homeowners can still check BayREN and their local clean energy provider for heat pump and electrification incentives. Those amounts and programs change by funding cycle, so we confirm what's currently offered before including it in any quote.

What Affects the Cost of Furnace Repair

We can't give an accurate price without seeing your furnace, because the same symptom can have very different causes. These are the main factors that shape the cost:

Whatever the repair, we explain the price before we start and won't do additional work without your approval.

  • Which part failed: cleaning a flame sensor is a small job, while a control board, inducer motor, or blower motor is a bigger one
  • Your furnace's brand, age, and model, which affect part availability
  • Whether the furnace is single-stage, two-stage, or variable-speed
  • Where it's installed: an attic, crawlspace, or tight closet takes more time than a garage
  • Any secondary damage, such as a burned wire or overheated component
  • Timing, since emergency visits outside regular hours involve after-hours scheduling

How a Furnace Repair Visit Works

When you contact us, we ask a few questions about what the furnace is doing, roughly how old it is, and where it's located. That helps the technician come prepared with the parts most likely to be needed. For no-heat situations, we offer 24/7 emergency service.

When the technician arrives, they talk with you about the symptoms, then inspect and test the system. You get a clear explanation of the problem and your options, with a price for each. If you approve, we make the repair, often in the same visit when the part is on hand.

Before leaving, we run the furnace through full heating cycles, check the safety controls and venting, and confirm warm air is reaching your registers. We'll also point out anything that may need attention later, such as a filter that's due for a change or wear we noticed, so you aren't caught off guard next winter.

Furnace Repair by city

What to expect

How a visit goes

  1. Diagnose First

    We track down why your system is acting up before suggesting a part or a replacement, so you're not paying to guess.

  2. Plain Explanations

    We tell you what's wrong, what your choices are, and what each one involves, in language that makes sense. Then you decide.

  3. Repair When It Makes Sense

    If your equipment can be fixed and still has life left, we'll say so. Bay Area appliance rules don't require replacing a system that works, and neither do we.

FAQ

Common questions

Do I have to replace my gas furnace because of the new Bay Area rules?

No. The Bay Area Air District's appliance rules do not require replacing working equipment. They apply only when an existing furnace fails or is replaced. Gas furnaces manufactured starting in 2029 must meet a zero-NOx standard, which is why many homeowners plan for a heat pump when their furnace eventually needs replacing.

Do you offer emergency furnace repair?

Yes. PrimeAir HVAC Repair Service offers 24/7 emergency service for homeowners in Fremont and nearby cities when a furnace stops working.

Is a burning smell from my furnace normal?

A dusty smell for the first few minutes after the furnace sits unused for months is common, because dust burns off the burners. If the smell lasts, smells electrical, or comes with smoke, turn the furnace off and call for service. If you smell gas, leave the house and call your gas utility from outside.

What can I check before calling for furnace repair?

Make sure the thermostat is set to heat and above room temperature, replace its batteries if it uses them, check that the furnace breaker hasn't tripped, look at the air filter, and confirm the furnace access panel is fully closed, since many furnaces won't run with the door off.

Can I still get a federal tax credit for a heat pump?

Not for new installations. The federal Energy Efficient Home Improvement Credit (25C) covered qualifying heat pumps placed in service before December 31, 2025. You can check BayREN and your local clean energy provider for current incentives, and we confirm what's available before quoting it.

How often should I change my furnace filter?

Check it monthly during the heating season and replace it when it looks dirty or as directed for your filter type. A clogged filter restricts airflow, which can cause overheating, short-cycling, and uneven heating.

Need Heating or Cooling Help?

Tell us what your system is doing, and we'll set up a visit to find the cause and talk through your options. For urgent breakdowns, we offer 24/7 emergency service.

Request Service Call (669) 286-3980
Call (669) 286-3980 Request Service