Skip to content
Serving Fremont and nearby cities Open 24 hours, 7 days a week ยท (669) 286-3980

Heating Repair in Hayward, CA

The short answer

PrimeAir HVAC Repair Service repairs gas furnaces, wall heaters, and heat pumps in homes throughout Hayward, with 24/7 emergency service. Bay Area Air District rules don't require you to replace a working furnace, so repairing a sound system is often the practical choice.

When your furnace quits on a cold night in Hayward, you want a straight answer about what's wrong and what it will take to fix it. PrimeAir HVAC Repair Service handles heating repair for homes across Hayward, including gas furnaces, wall and floor heaters, heat pumps, and the ductwork that connects them. We're based in Fremont, about 5 miles away, and we offer 24/7 emergency service when the heat goes out after hours.

Heating problems we see in Hayward homes

Hayward homes use a mix of heating systems: gas forced-air furnaces, older floor or wall furnaces, and heat pumps in newer or remodeled houses. Each type fails in its own ways, but homeowners usually call us about the same symptoms.

Winters here are mild, so a heating system can sit unused for months and then get pushed hard during the first cold stretch. Dust buildup, weak igniters, and clogged filters often show up all at once in late fall.

  • The furnace runs but blows cold or lukewarm air
  • The burner lights, then shuts off after a few minutes, often from a dirty flame sensor or an overheating limit switch
  • No heat at all, or a blank or unresponsive thermostat
  • Banging, squealing, or rattling from the furnace or ducts
  • Short cycling, where the system turns on and off constantly
  • Uneven heat, with some rooms cold while others are warm
  • A heat pump that ices over, gets stuck in defrost, or runs on emergency heat all the time
  • A burning smell or a gas smell. If you smell gas, leave the house and call your gas utility first.

What happens during a heating repair visit

Our technician starts by asking what you've noticed. That includes when the problem started, what the thermostat shows, and any sounds or smells. Then we test the system from the thermostat to the burners or compressor, checking ignition, airflow, safety controls, electrical connections, and venting.

Once we find the cause, we explain it in plain terms and go over your repair options before any work begins. Common fixes often happen on the first visit, including igniters, flame sensors, blower motors, capacitors, and control boards. If a part has to be ordered, we'll tell you, and we'll make sure your home is safe in the meantime.

On gas furnaces, we also check the heat exchanger for cracks and confirm the venting is working properly. Both affect carbon monoxide safety as well as comfort.

Repair or replace? What the Bay Area Air District rules mean for you

Some Hayward homeowners have heard that new air quality rules will force them to get rid of their gas furnace. That's not the case. The Bay Area Air District's appliance rules don't require you to replace working equipment. They apply only when an existing furnace or water heater fails or is replaced.

What will change is the type of furnace you can buy later. Under Rule 9-4, natural gas furnaces manufactured from 2029 on must meet a zero-NOx emission standard. In practice, that points homeowners toward heat pumps when a furnace is replaced after that date. If your furnace is aging but still repairable, fixing it now is a reasonable choice. It also gives you time to plan your next system instead of deciding in a hurry during a breakdown.

Sometimes a repair no longer makes sense, such as a cracked heat exchanger on an old unit or repeated major part failures. In that case, we'll tell you directly and walk you through your options, including heat pumps.

Heat pump repair and current incentives

We repair heat pumps as well as furnaces. That includes problems with reversing valves, defrost controls, refrigerant leaks, outdoor fan motors, and backup heat strips. A working heat pump handles Hayward's mild winters well. If yours is leaning on emergency heat or struggling to keep up, it usually has a fixable problem.

If you're thinking about switching to a heat pump, note that the federal Energy Efficient Home Improvement Credit (25C) only covered qualifying heat pumps placed in service before December 31, 2025. It isn't available for new installations. Local programs may still help. Bay Area homeowners can check BayREN and their local clean energy provider for heat pump and electrification incentives. Amounts and availability change with each funding cycle, so we confirm the current offer before including it in any quote.

Serving Hayward and nearby cities

We provide heating repair throughout Hayward, including ZIP codes 94541, 94542, 94544, and 94545 in Alameda County. From our Fremont base, we also serve Union City, San Leandro, Newark, Foster City, and Redwood City.

If your heat goes out in the middle of the night or on a weekend, call us. We offer 24/7 emergency service, so you don't have to wait until Monday to get your home warm again.

More services in Hayward

Related

What to expect

How a visit goes

  1. Diagnose First

    We track down why your system is acting up before suggesting a part or a replacement, so you're not paying to guess.

  2. Plain Explanations

    We tell you what's wrong, what your choices are, and what each one involves, in language that makes sense. Then you decide.

  3. Repair When It Makes Sense

    If your equipment can be fixed and still has life left, we'll say so. Bay Area appliance rules don't require replacing a system that works, and neither do we.

FAQ

Common questions

Do I have to replace my gas furnace because of the new Bay Area Air District rules?

No. The Air District's appliance rules don't require replacing working equipment. They apply only when an existing furnace fails or is replaced. Starting with furnaces manufactured from 2029, new gas furnaces must meet a zero-NOx standard, which points most replacements after that date toward heat pumps.

What should I check before calling about a furnace that won't heat?

Make sure the thermostat is set to heat and has working batteries. Check that the furnace breaker hasn't tripped and that the filter isn't clogged. If those are fine and you still have no heat, call us. We offer 24/7 emergency service.

Do you repair wall furnaces and floor furnaces?

Yes. Many older Hayward homes still use wall or floor furnaces. We diagnose and repair them, including pilot and ignition problems, thermocouples, gas valves, and venting issues.

Is it worth repairing an older furnace?

Often it is, especially when the heat exchanger is sound and the problem is a single part. If repairs keep adding up or there's a safety issue, we'll explain why replacement may make more sense and go over your options.

Can I still get a federal tax credit for a new heat pump?

No. The federal 25C credit covered qualifying heat pumps placed in service before December 31, 2025, and isn't available for new installations. You can check BayREN and your local clean energy provider for current incentives. We confirm any offer before quoting it.

What about my gas water heater? Do the same rules apply?

The zero-NOx date for small water heaters under Rule 9-6 was set for 2027. However, the Air District Board is considering amendments in November 2026 that could delay it. Check the current rule before planning a water heater replacement.

Need Heating or Cooling Help?

Tell us what your system is doing, and we'll set up a visit to find the cause and talk through your options. For urgent breakdowns, we offer 24/7 emergency service.

Request Service Call (669) 286-3980
Call (669) 286-3980 Request Service